배터리 휴대용 수동 상호 변조 분석기
The iPA Series Passive Intermodulation (PIM) analyzer is the first battery powered PIM Test Analyzer versatile enough to support multiple test scenarios such as testing at the top of the tower, base of tower, roof top and in-building for DAS systems. This IEC compliant 20W, rugged, battery operated design includes a tablet computer in a ruggedized case for remote control. This allows hands-free dynamic testing that is safe and convenient. Add the optional Range to Fault (RTF) module to quickly identify the location of PIM and Return Loss sources. Evolved from a design legacy of field proven analyzers, this PIM Analyzer enables network operators to improve site performance by finding and eliminating sources of passive intermodulation at the cell site. An intuitive touch screen interface is also available for local control, performing tests and quickly generating site reports.
iPA 시리즈는 DAS(분산안테나) 시스템의 타워 꼭대기 바닥, 지붕 꼭대기 그리고 빌딩 내에서의 여러 테스트를 지원하는데 충분한 최초의 배터리 구동형 PIM 테스트 분석기 입니다. 이 장비는 IEC 규정에 준수하는 20W의 견고한 배터리로 작동되며, 또한 태블릿 컴퓨터로 원격 제어가 되기에, 사용자가 안전한 상태에서 편리하게 다이나믹한 핸즈-프리 테스트를 가능하게 합니다. PIM 및 리턴 로스 소스의 위치를 신속하게 체크하는 RTF(Range to Fault) 모듈도 옵션으로 추가가 가능합니다. 수 많은 현장 엔지니어들의 입증된 경험을 바탕으로 설계된 iPA 시리즈 PIM 분석기는 사용자가 현장에서 PIMD를 찾아 제거함으로써 사이트 성능을 향상시킬 수 있도록 합니다. 직관적인 터치 스크린 인터페이스는 현장에서 테스트를 수행하는데 있어 편리하게, 또한 신속하게 보고서 작성도 가능합니다.
주요특징
- Rugged and reliable; designed with tower climbers in mind
- Fully configurable frequencies, powers and IM products
- 7 inch tablet computer included for remote control of device
- Simple to operate touch screen interface
- Extensive reporting capabilities
- Spectrum monitor, frequency sweep and time trace modes
- RTF compatible
- Battery powered
- 견고함, 최고의 신뢰성(IP54, 40G) : 현장의 엔지니어를 위한 최고의 설계
- 완전하게 구성 가능한 주파수, 전력 및 IM 제품
- 태블릿 컴퓨터로 가능한 원격제어
- 작동하기 편한 터치 스크린 인터페이스
- 광범위한 보고서 작성 기능
- 스펙트럼 모니터, 주파수 스윕 및 시간 추적 모드
- RTF (Range to Fault) 옵션
- 배터리 구동형
기술 사양
SYSTEM
Measurement method |
Reverse (reflected) PIM, 3rd and 5th order. (iPA-2100A 3rd, 5th and 7th order) |
Residual PIM |
< -117dBm/-160dBc maximum (<-125dBm/-168dBc typical) |
Interface ports |
1x RF output (7-16 DIN female), 1x USB 2.0 Host, 1x USB 2.0 Slave, 1x SD |
User interface |
Remote - tablet computer (included), any Wi-Fi enabled user device with web browser |
Return loss alarm |
Automatic detection and shut down when high RL is detected |
TRANSMITTER
Transmit frequencies |
See model table |
Frequency increment |
100kHz |
Frequency accuracy |
± 5ppm maximum, aging ± 1ppm maximum after first year |
User interface |
Remote - tablet computer (included), any Wi-Fi enabled user device with web browser |
Power per tone (adjustable) |
iPA-0703A, iPA-0707A, iPA-0790A, iPA-0850A, iPA-1921A 0.003 to 20W (+5 to +43dBm in 1dB increments) |
Power accuracy (per tone) |
± 0.5dB maximum |
RECEIVER
Receive band (100kHz steps) |
See model table |
Measurement noise floor |
< -128dBm |
Measurement range |
-50dBm to -128dBm |
ELECTRICAL
Battery power |
25.9 VDC, 2600 mAh, 67Wh Lithium Ion battery packs (removable) |
Battery operating time |
Depends on usage, 2 hr minimum per battery pack |
Battery charger |
Output: 29.4 VDC, 1.2 Amp |
MECHANICAL
Dimensions H x D x W |
369 x 160 x 240mm | 14.5 x 6.3 x 9.4in |
Weight |
12kg | 26lbs |
ENVIRONMENTAL
Temperature range |
-10ºC to +45ºC | +14°F to +113°F |
Ingress protection |
IP54. IP67 when enclosed in optional hard case |
Operational humidity |
5% to 95% RH non-condensing |
Storage temperature range |
-10°C to +60°C | +14°F to +140°F |
Mechanical shock |
40G shock rating |
주문 정보
MODELS |
|
DESCRIPTION |
TX1 RANGE |
TX2 RANGE |
RX RANGE (PIM) |
RTF MODULE * |
iPA-0707A |
700MHz LOW/HIGH |
728-731.5MHz |
741-764MHz |
698-716MHz
776-802MHz |
RTF-1000 |
iPA-0703A |
APT700 LTE |
758-768MHz |
778-803MHz |
703-748MHz |
RTF-1000 |
iPA-0790A |
LTE 800 |
791-796MHz |
808-821MHz |
832-862MHz |
RTF-1000 |
iPA-0850A |
850MHz |
869MHz |
879-894MHz |
824-849MHz |
RTF-1000 |
iPA-0900A |
GSM900 |
932.5-937.5MHz |
949-960MHz |
903-915MHz |
RTF-1000 |
iPA-0901A |
EGSM900 |
925-935MHz |
945-960MHz |
880-915MHz |
RTF-1000 |
iPA-1800A |
DCS1800 |
1805-1812MHz |
1825-1880MHz |
1710-1785MHz |
RTF-2000 |
iPA-1921A |
Dual Band PCS/AWS |
1930-1950MHz
1930-1950MHz |
1970-1990MHz
2110-2155MHz |
1850-1910MHz
1710-1755MHz |
RTF-2000 |
iPA-2100A |
UMTS (3rd & 7th) |
2110-2130MHz |
2150-2170MHz |
1920-1980MHz
2050-2090MHz |
RTF-2000 |
iPA-2600A |
LTE 2600 |
2620-2630MHz |
2650-2690MHz |
2500-2570MHz |
RTF-2600 |
Notes |
Specifications subject to change without notice. |
1. |
*Range to Fault is an optional accessory available for iPA test instruments which enables users to measure distance to return loss faults as well as distance to PIM faults. The RTF module is sold separately. |
2. |
Dual Battery charger for standalone charging sold separately. |
WARNING: |
Use of the portable PIM analyzer in a radiating mode, for example when connected to an antenna not enclosed in an anechoic environment, may be a violation of licensing regulations. Users should obtain permission in advance from any licensed operators that might be affected by these tests. Furthermore, radiating high RF power can pose a personnel risk. |