벤치탑 PIM (PASSIVE INTERMODULATION) 분석기
The iBA Series PIM Analyzer is a complete bench top and rack mounting PIM test solution used with a system controller* and intuitive user software. This economical solution comes in model variations that cover all major commercial wireless bands. The iBA base model (A-Series) measures Reverse/reflected IM only. The B-Series adds a second test port to support a Reverse IM measurement on either port and a forward IM measurement port-to-port. Both the A & B Series can be fitted with optional internal DC/AISG Bias Tee.
iBA 시리즈 PIM 분석기는 시스템 컨트롤러 및 직관적인 사용자 소프트웨어와 함께 사용되는 완벽한 벤치탑 및 랙 장착 가능한 PIM 테스트 솔루션 입니다. 아주 경제적이며, 모든 주요 상업용 무선 대역을 포괄하는 모델로 제공됩니다. iBA 시리즈의 기본 모델인 iBA-A는 역방향 / 반사 된 IM을 측정하며 iBA-B는 포트 및 포워드 IM측정 Port-to-Port에서 역방향 IM 측정을 지원하는 두 번째 테스트 포트를 추가합니다. A와 B 시리즈는 선택 사양의 내부 DC / AISG bias-Tee를 장착할 수 있습니다.
주요특징
- Fully integrated system in compact size
- Fully configurable frequencies, power and IM products
- USB control interface
- Frequency sweep and time trace modes
- Range to Fault (RTF) optional accessory, allows users to measure distance to Return Loss and PIM Fault
- Optional internal DC / AISG Bias-Tee
- 컴팩트 사이즈의 완전 통합 시스템
- 완전히 구성 가능한 주파수, 전력 및 IM 제품
- USB 컨트롤 인터페이스
- 주파수 스윕 및 시간 추적 모드
- RTF (Range to Fault) 옵션
- 반사손실 (Return Loss) 및 PIM Fault로 거리 측정 가능
- 내부 DC/AISG bias-Tee 옵션
기술 사양
SYSTEM
Measurement method |
A-Series: Reverse (Reflected) PIM | B-Series: Port 1 Reverse; Port 2 Reverse; Port-to-Port Forward PIM |
Residual PIM |
<-125dBm / over 90% of the band (x 2 @ 43dBm) |
IM order |
3rd, 5th, 7th, 9th and 11th order |
User interface ports |
1 x USB Type B, 1 x USB Type A, 1x Monitor Port (N Female).
Bias-Tee Option: 1 x AISG / DC on 8 Pin DIN Female |
Test ports |
A-Series: 1 x RF Output (7-16 DIN Female); B-Series: 2 x RF Output (7-16 DIN Female) |
TRANSMITTER
Transmit frequencies |
Refer to iBA series model table |
Frequency increment |
100kHz |
Frequency accuracy |
± 5ppm maximum, aging ± 1ppm maximum after first year |
Power per tone (adjustable) |
+30 to +44dBm | 1W to 25W |
Power accuracy (per tone) |
± 0.35dB |
RECEIVER
Receive band (100kHz steps) |
Refer to iBA Series Model Table |
Measurement noise floor |
<-130 dBm (-135 dBm, typical) |
Measurement range |
-55dBm to -130dBm |
AISG/DC OPTION
Factory Fitted AISG Modem and Bias Tee |
AISG ON/OFF keying AND/OR +28V DC available on the RF Test port (on Port 1 for the B Series iBA)
AISG baseband (RS485) AND/OR +28V DC is available on the 8 pin DIN Female connector |
AISG/DC Specifications: (DC specs applies to both ports) |
Output Voltage: +28V max
Current: 2.5A max
Frequency: 2.076 to 2.276 MHz
Return loss: >10dB |
Ordering Information |
Add Suffix -1 to model number
Eg iBA-1800A-1 or iBA-1800B-1 to include the AISG/DC Option |
ELECTRICAL
Mains power |
115 - 230V, 50 - 60Hz AC |
Power consumption |
800W |
MECHANICAL
Dimensions H x D x W |
A series- 175.3 x 508 x 482.6mm | 6.9 x 20 x 19in
B series- 264.2 x 508 x 482.6mm | 10.4 x 20 x 19in |
Weight |
A series- 22.7kg | 50lbs
B series- 30kg | 66lbs |
Cooling |
Forced air (100mm gap to be maintained at the rear when rack mounted, 1U spacing recommended between units) |
ENVIRONMENTAL
Temperature range |
+10ºC to +40ºC | +50°F to +104°F (operating) |
Ingress protection |
Indoor use (or similar protected outdoor environment) |
Operational humidity |
5% to 90% non-condensing |
Storage temperature range |
-20°C to +60°C | -4°F to +140°F |
주문 정보
IBA A-SERIES MODELS |
Reverse IM only |
MODEL |
TX RANGE |
RX RANGE (PIM) |
IM ORDER |
RTF MODULE |
iBA-0700LA |
728-746MHz |
698-716MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-1000 |
iBA-0700HA |
728-757MHz |
776-787MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-1000 |
iBA-0703A |
758-803MHz |
703-748MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-1000 |
iBA-0790A |
791-821MHz |
832-862MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-1000 |
iBA-0850A |
869-894MHz |
824-849MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-1000 |
iBA-0901A |
925-960MHz |
880-915MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-1000 |
iBA-1800A |
1805-1880MHz |
1710-1785MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-2000 |
iBA-1921A |
1930-1990MHz / 2110-2155MHz |
1710-1755MHz / 1850-1910MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-2000 |
iBA-2101A |
2110-2170MHz |
1920-2080MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-2000 |
iBA-2600A |
2620-2690MHz |
2500-2570MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-2600 |
IBA B-SERIES MODELS |
MODEL |
TX RANGE |
RX RANGE (PIM) |
IM ORDER |
RTF MODULE |
iBA-0700LB |
728-746MHz |
698-716MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-1000 |
iBA-0700HB |
728-757MHz |
776-787MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-1000 |
iBA-0703B |
758-803MHz |
703-748MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-1000 |
iBA-0790B |
791-821MHz |
832-862MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-1000 |
iBA-0850B |
869-894MHz |
824-849MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-1000 |
iBA-0901B |
925-960MHz |
880-915MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-1000 |
iBA-1800B |
1805-1880MHz |
1710-1785MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-2000 |
iBA-1921B |
1930-1990MHz / 2110-2155MHz |
1710-1755MHz / 1850-1910MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-2000 |
iBA-2101B |
2110-2170MHz |
1920-2080MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-2000 |
iBA-2600B |
2620-2690MHz |
2500-2570MHz |
3rd, 5th, 7th, 9th, 11th |
RTF-2600 |